Contact Ultera at (949)-367-8800
    USA  
bannertest.gif (7122 bytes)
corner.gif (613 bytes)







Where to Buy
About Ultera
FAQs
Articles
Feed Back
Press
Careers
Home
 

 Models

  Optical Imager3

   Stor2

 Related
  Optical Imager1
  Optical Imager2
  Optical Imager3
Contact us to configure an Ultera solution to fit your needs

      Optical Imager 3     

Optical RAID Controller   

Tape Mirroring
dot.gif (941 bytes) High Performance
dot.gif (941 bytes) Enhanced Reliability
dot.gif (941 bytes) Disaster Recovery
Optical 
Imager 3

When One Copy Just Isn't Enough

Increased Overall System Performance – Simultaneously create two identical backup optical media in real-time.
Increased Data Availability – Recover valuable data even if one optical media becomes lost, stolen or damaged.

Increased Reliability – Verify restored data automatically comparing optical media contents.  Either copy can be used independently for recovery.

Disaster Recovery – Full fault tolerance protection with user configurable disaster recovery options.
Plug & Play Compatibility – seen by the host as a single optical drive, jukebox or library. Platform independent providing 100% transparent operation to all backup management software, no special drivers required.
Robotics Support – mirror within a single optical library or across two optical libraries.
Easy Media Management – insert a mirror set of optical media cartridges in any order.
Remote Management – manage operations and event logging remotely via optional Graphical User Interface (GUI).
Local Management – set operating mode and offline operations locally via the front panel operator console.
Operating Modes Include:
Mirroring – simplify disaster recovery plans by writing the same data to two drives simultaneously.
  • Four specific mirroring options.
  • Two Disaster Recovery Options
  • Fault Tolerant Mode
Pass-thru – direct access of individual drives within the array.
Serverless Tape Copy, Copy/Verify and Verify Only – offline high speed media duplication including standalone optical & disk drives and optical libraries.
Target Markets
dot.gif (333 bytes) Disaster Recovery
dot.gif (333 bytes) Video Editing
dot.gif (333 bytes) Data Acquisition
dot.gif (333 bytes) Defense
dot.gif (333 bytes) Financial
dot.gif (333 bytes) Government
dot.gif (333 bytes) Imaging
      Optical Imager 3      

Specifications             

Supported RAID Levels
Level 1 Mirroring two drives
Host Interface
The host interface provides connection between the array controller and SCSI host system. ULTRA2 LVD Wide synchronous transfer provides 80 MB/sec burst data transfer rate.
Array Interface
The array interface provides connection between the array controller and SCSI optical drives.  Two independent parallel ULTRA LVD/SE Wide SCSI channels provide 40 MB/sec sustained data transfer rate for each array channel.   Compatible with all SCSI optical drives including DVD-RAM and Magneto-Optical (MO).
Operator Console
The front panel operator console features a 4 line by 20 character display and 4 push button key pad.
 Optical Imager 3 Models
OD052 Controller board only
OD852 5 1/4" Half Height internal packaging with front panel operator console
OD1052 Table Top external packaging with power supply and front panel operator console
OD2152 Single Controller Board, 1U high 19 inch rackmount with power supply and front panel operator console
OD2252 Dual Controller Boards,1U high 19 inch rackmount with 2 power supplies and 2 front panel operator consoles
One Year Warranty
 Dimensions Width Depth Height
Board 5.50" 7.80" 0.50"
5 1/4" Half Height 5.75" 9.20" 1.67"
Low Profile Table Top 9.75" 11.00" 2.50"
Rackmount 17.00" 23.31" 1.75"
Environment (Exclusive of Drives)
POWER
Input Voltage +5VDC, 10%
Supply Current 3.5 amps, max
TEMPERATURE
Operating 5 degree C to 50 degree C
Non-operating -40 degree C to 60 degree C
HUMIDITY
Operating 10% to 80% non-condensing
Non-operating 10% to 90% non-condensing
Also available as:
 Stor2 Models, Specifications
OR052 Controller board only
OR852 5 1/4" Half Height internal packaging with front panel operator console
OR1052 Table Top external packaging with power supply and front panel operator console
OR2152 Single Controller Board, 1U high 19 inch rackmount with power supply and front panel operator console
OR2252 Dual Controller Boards,1U high 19 inch rackmount with 2 power supplies and 2 front panel operator consoles
5 1/4" Internal Half Height
Half Height
Low Profile Table Top

TableTop Enclosure

Rackmount
Dual Controller 1U Rackmount
          UltNewLogo.GIF (3212 bytes)

Ultera Systems, Inc.
26052 Merit Circle Laguna Hills, CA 92653
Phone: 949.367.8800 Fax: 949.367.0758
E-mail: inform@ultera.com
Visit us at www.ultera.com

1994-2003. Ultera Systems, Inc. All Rights Reserved., Legal Information
| Site Map | Ultera Solutions | High Performance | Disaster Recovery | Data Archiving | Media Duplication | Video Streaming | CD-R Mastering | DVD-R Mastering | Ultera Products | Tape RAID Controller | Tape Striping | Tape Mirroring | Tape Library Striping | Tape Library Mirroring | Optical RAID Controller  | Optical Striping | Optical Mirroring | Optical Library Striping | Optical Library Mirroring  | Remote ManagementWhere to Buy  | About Ultera | FAQ | ArticlesFeedback | Press | Careers | Home |