|
Simply the Fastest
most reliable
backup / restore solution
available! |
Optical
Striper 3LVD |
|
|
|
|
Increase Your Performance data
is striped across five
independent parallel array channels. Data transfer rate is increased by as much as four
times the speed of a single optical drive.Protect Your Data
data
is regenerated using parity information in the event of missing or bad media/drive.
Plug & Play Compatibility seen by the host as a single optical drive,
jukebox or library. Platform independent providing 100% transparent operation to all
backup management software, no special drivers required.
Robotics Support seen by the host as
1, 2, 3 or 4 independent optical drives. Provides optical RAID striping or mirroring
within a single optical library or across multiple optical libraries. |
|
|
Data Reconstruction
recreate data previously written to a failed drive or unreadable media. |
|
Easy Media Management
insert a stripe set of optical media cartridges in any order. |
|
Remote Management
manage operations and event logging remotely via optional Graphical User Interface (GUI). |
|
Local Management
set operating mode and offline operations locally via the front panel operator console. |
|
Operating Modes Include: |
|
Striping across up to four drives with or
without an additional parity drive. Data transfer rate is increased by a factor of up to four. |
|
Mirroring simplify disaster recovery
plans by writing the same data to up to five independent drives simultaneously. |
|
Pass-thru direct access of individual
drives within the array. |
|
Serverless Optical Media Copy, Copy/Verify and Verify
Only offline high speed media duplication including standalone optical
& disk drives
and optical libraries. Create up to four copies simultaneously. |
|
|
Target Markets |
|
|
|
Disaster Recovery |
|
|
|
High Speed
Backup/Restore |
|
|
|
Video Editing |
|
|
|
Video Streaming |
|
|
|
Data Acquisition |
|
|
|
Defense |
|
|
|
Financial |
|
|
|
Government |
|
|
|
Imaging |
|
|
|
|
|
Supported RAID Levels |
Level 0 |
Striping
two drives (2+0) or four drives (4 + 0) |
Level 3 |
Striping two drives or four drives plus a parity drive
(2+1 or 4 +1) |
Level 1 |
Mirroring two, three, four, or five drives |
|
|
Host Interface |
The host interface provides connection between
the array controller and SCSI host system. ULTRA2 LVD Wide synchronous transfer provides
80 MB/sec burst data transfer rate. |
|
Array Interface |
The array interface provides connection
between the array controller and SCSI optical drives. Five independent parallel
ULTRA LVD/SE Wide SCSI channels provide 40 MB/sec burst data transfer rate for each
array channel. Compatible with all SCSI optical drives including
DVD-RAM and
Magneto-Optical (MO). |
|
Operator Console |
The front panel operator console features a 4
line by 20 character display and 4 push button key pad. |
|
|
|
|
OD103LVD |
|
Controller board only |
|
|
|
OD803LVD |
|
5 1/4" Half
Height internal packaging with front panel operator console |
|
|
|
OD1003LVD |
|
Table Top external
packaging with power supply and front panel operator console |
|
|
|
OD2103LVD |
|
Single Controller
Board, 1U high 19 inch rackmount with power supply and front panel operator console |
|
|
|
OD2203LVD |
|
Dual Controller
Boards,1U high 19 inch rackmount with 2 power supplies and 2 front panel operator consoles |
|
|
|
|
|
One Year Warranty |
|
|
|
|
|
|
|
Board |
|
5.50" |
7.80" |
0.50" |
5 1/4" Half
Height |
|
5.75" |
9.20" |
1.67" |
Low Profile Table
Top |
|
9.75" |
11.00" |
2.50" |
Rackmount |
|
17.00" |
23.31" |
1.75" |
|
Environment (Exclusive of Drives) |
|
POWER |
|
|
Input Voltage |
|
+5VDC,
10% |
Supply Current |
|
3.5
amps, max |
|
|
TEMPERATURE |
|
Operating |
|
5
degree C to 50 degree C |
Non-operating |
|
-40
degree C to 60 degree C |
|
|
HUMIDITY |
|
Operating |
|
10% to
80% non-condensing |
Non-operating |
|
10% to
90% non-condensing |
|
|
RapidStor,
Specifications™ Models
|
|
|
|
OL103LVD |
|
Controller board only |
|
|
|
OL803LVD |
|
5 1/4" Half
Height internal packaging with front panel operator console |
|
|
|
OL1003LVD |
|
Table Top external
packaging with power supply and front panel operator console |
|
|
|
OL2103LVD |
|
Single Controller
Board, 1U high 19 inch rackmount with power supply and front panel operator console |
|
|
|
OL2203LVD |
|
Dual Controller
Boards,1U high 19 inch rackmount with 2 power supplies and 2 front panel operator consoles |
|
|
RAILStor,
Specifications
Specifications
|
|
|
|
OR103LVD |
|
Controller board only |
|
|
|
OR803LVD |
|
5 1/4" Half
Height internal packaging with front panel operator console |
|
|
|
OR1003LVD |
|
Table Top external
packaging with power supply and front panel operator console |
|
|
|
OR2103LVD |
|
Single Controller
Board, 1U high 19 inch rackmount with power supply and front panel operator console |
|
|
|
OR2203LVD |
|
Dual Controller
Boards,1U high 19 inch rackmount with 2 power supplies and 2 front panel operator consoles |
|
|
|
|
|
5
1/4" Internal
Half Height |
Low
Profile
Table Top |
Rackmount |
|
|
|
Ultera Systems, Inc.
26052 Merit Circle · Laguna Hills, CA 92653
Phone: 949.367.8800 · Fax: 949.367.0758
E-mail: inform@ultera.com
Visit us at www.ultera.com |
|