Contact Ultera at (949)-367-8800
    USA  
bannertest.gif (7122 bytes)
corner.gif (613 bytes)







Where to Buy
About Ultera
FAQs
Articles
Feed Back
Press
Careers
Home
 

 

 

 Models

  Optical 
   Striper3LVD
  RapidStor
  RAILStor

 Related

  Optical 
   Striper3LVD

  Striper3
Contact us to configure an Ultera solution to fit your needs

      OPTICAL STRIPER 4 

Optical RAID Controller   

Simply the Fastest most reliable backup / restore solution available! Optical 
Striper 4
Increase Your Performance – data is striped across five Striper 3LVD Controller
independent parallel array channels. Data transfer rate is increased by as much as four times the speed of a single optical drive.

Protect Your Data – data is regenerated using parity information in the event of missing or bad media/drive.

Plug & Play Compatibility – seen by the host as a single optical drive, jukebox or library. Platform independent providing 100% transparent operation to all backup management software, no special drivers required.

Robotics Support – seen by the host as 1, 2, 3 or 4 independent optical drives.  Provides optical RAID striping or mirroring within a single optical library or across multiple optical libraries.

Data Reconstruction – recreate data previously written to a failed drive or unreadable media.
Easy Media Management – insert a stripe set of optical media cartridges in any order.
Remote Management – manage operations and event logging remotely via optional Graphical User Interface (GUI).
Local Management – set operating mode and offline operations locally via the front panel operator console.
Operating Modes Include:
Striping – across up to four drives with or without an additional parity drive. Data transfer rate is increased by a factor of up to four.
Mirroring – simplify disaster recovery plans by writing the same data to up to five independent drives simultaneously.
Pass-thru – direct access of individual drives within the array.
Serverless Optical Media Copy, Copy/Verify and Verify Only – offline high speed media duplication including standalone optical & disk drives and optical libraries. Create up to four copies simultaneously.
Target Markets
dot.gif (333 bytes) Disaster Recovery
dot.gif (333 bytes) High Speed
Backup/Restore
dot.gif (333 bytes) Video Editing
dot.gif (333 bytes) Video Streaming
dot.gif (333 bytes) Data Acquisition
dot.gif (333 bytes) Defense
dot.gif (333 bytes) Financial
dot.gif (333 bytes) Government
dot.gif (333 bytes) Imaging
      OPTICAL STRIPER 4

Specifications             

Supported RAID Levels
Level 0 Striping two drives (2+0) or four drives (4 + 0)
Level 3 Striping two drives or four drives plus a parity drive (2+1 or 4 +1)
Level 1 Mirroring two, three, four, or five drives
Host Interface
The host interface provides connection between the array controller and SCSI host system. ULTRA2 LVD Wide synchronous transfer provides 80 MB/sec sustained data transfer rate.
Array Interface
The array interface provides connection between the array controller and SCSI optical drives.  Five independent parallel ULTRA LVD/SE Wide SCSI channels provide 40 MB/sec burst data transfer rate for each array channel.   Compatible with all SCSI optical drives including DVD-RAM and Magneto-Optical (MO).
Operator Console
The front panel operator console features a 4 line by 20 character display and 4 push button key pad.
 Optical Striper 4 Models
OD104 Controller board only
OD804 5 1/4" Half Height internal packaging with front panel operator console
OD1004 Table Top external packaging with power supply and front panel operator console
OD2104 Single Controller Board, 1U high 19 inch rackmount with power supply and front panel operator console
OD2204 Dual Controller Boards,1U high 19 inch rackmount with 2 power supplies and 2 front panel operator consoles
One Year Warranty
 Dimensions Width Depth Height
Board 5.50" 7.80" 0.50"
5 1/4" Half Height 5.75" 9.20" 1.67"
Low Profile Table Top 9.75" 11.00" 2.50"
Rackmount 17.00" 23.31" 1.75"
Environment (Exclusive of Drives)
POWER
Input Voltage +5VDC, 10%
Supply Current 3.5 amps, max
TEMPERATURE
Operating 5 degree C to 50 degree C
Non-operating -40 degree C to 60 degree C
HUMIDITY
Operating 10% to 80% non-condensing
Non-operating 10% to 90% non-condensing

 RapidStor, Specifications Models

OL104 Controller board only
OL804 5 1/4" Half Height internal packaging with front panel operator console
OL1004 Table Top external packaging with power supply and front panel operator console
OL2104 Single Controller Board, 1U high 19 inch rackmount with power supply and front panel operator console
OL2204 Dual Controller Boards,1U high 19 inch rackmount with 2 power supplies and 2 front panel operator consoles

 RAILStor, Specifications Specifications

OR104 Controller board only
OR804 5 1/4" Half Height internal packaging with front panel operator console
OR1004 Table Top external packaging with power supply and front panel operator console
OR2104 Single Controller Board, 1U high 19 inch rackmount with power supply and front panel operator console
OR2204 Dual Controller Boards,1U high 19 inch rackmount with 2 power supplies and 2 front panel operator consoles
Half Height
TableTop Enclosure
Dual Controller 1U Rackmount
5 1/4" Internal
Half Height
Low Profile
Table Top
Rackmount
         

Ultera Systems, Inc.
26052 Merit Circle Laguna Hills, CA 92653
Phone: 949.367.8800 Fax: 949.367.0758
E-mail: inform@ultera.com
Visit us at www.ultera.com

1994-2003. Ultera Systems, Inc. All Rights Reserved., Legal Information
| Site Map | Ultera Solutions | High Performance | Disaster Recovery | Data Archiving | Media Duplication | Video Streaming | CD-R Mastering | DVD-R Mastering | Ultera Products | Tape RAID Controller | Tape Striping | Tape Mirroring | Tape Library Striping | Tape Library Mirroring | Optical RAID Controller  | Optical Striping | Optical Mirroring | Optical Library Striping | Optical Library Mirroring  | Remote ManagementWhere to Buy  | About Ultera | FAQ | ArticlesFeedback | Press | Careers | Home |