Contact Ultera at (949)-367-8800
    USA  
bannertest.gif (7122 bytes)
corner.gif (613 bytes)







Where to Buy
About Ultera
FAQs
Articles
Feed Back
Press
Careers
Home
 

 

 

 Models

  Striper 4
  LibraryMaster
  RAILMaster

 Related

  Striper 4

  Striper 3LVD
  Striper 3D
  Striper 3
  Striper 2
Contact us to configure an Ultera solution to fit your needs
      STRIPER 4     Tape RAID Controller   
Simply the Fastest most reliable backup / restore solution available! Striper4 Logo
Designed for Host Systems & Drives with SCSI LVD/SE Interfaces
260 GB/Hour sustained backup SPEED

Striper 4 Controller

 

Increase Your Performance – data is striped across five independent parallel array channels. Data transfer rate, as well as search speed, is increased by as much as four times the speed of a single tape drive.
Protect Your Data – data is regenerated using parity information in the event of missing or bad media/drive.
Plug & Play Compatibility – seen by the host as a single tape/library. Platform independent providing 100% transparent operation to all backup management software, no special drivers required.
Robotics Support – stripe or mirror within a single tape library or across multiple tape libraries.
Data Reconstruction – recreate data previously written to a failed drive or unreadable media.
Easy Media Management – insert a stripe set of tape cartridges in any order.
Remote Management – manage operations and event logging remotely via optional Graphical User Interface (GUI).
Local Management – set operating mode and offline operations locally via the front panel operator console.
Operating Modes Include:
Striping – across up to four drives with or without an additional parity drive. Data transfer rate is increased by a factor of up to four.
Stripe & Mirror – stripe data across two drives while mirroring the same data to two other drives simultaneously.
Mirroring – simplify disaster recovery plans by writing the same data to up to five independent drives simultaneously.
Pass-thru – direct access of individual drives within the array.
Serverless Tape Copy, Copy/Verify and Verify Only – offline high speed media duplication including standalone tape drives and tape libraries. Create up to four copies simultaneously.
Target Markets
dot.gif (333 bytes) Disaster Recovery
dot.gif (333 bytes) High Speed
Backup/Restore
dot.gif (333 bytes) Video Streaming
dot.gif (333 bytes) Data Acquisition
dot.gif (333 bytes) Defense
dot.gif (333 bytes) Financial
dot.gif (333 bytes) Government
dot.gif (333 bytes) Imaging
      STRIPER 4  Specifications             
Supported RAID Levels
Level 0 Striping two drives (2+0) or four drives (4 + 0)
Level 3 Striping two drives or four drives plus a parity drive (2+1 or 4 +1)
Level 1 Mirroring two, three, four, or five drives
Host Interface
The host interface provides connection between the array controller and SCSI host system. ULTRA2 LVD Wide synchronous transfer provides 80 MB/sec sustained data transfer rate.
Array Interface
The array interface provides connection between the array controller and SCSI tape drives. Five independent parallel ULTRA LVD/SE Wide SCSI channels provide 40 MB/sec sustained data transfer rate for each array channel. Compatible with all SCSI tape drives including DDS, 8mm, AIT, DLT, SDLT, LTO and IBM 3480/3490/3590.
Operator Console
The front panel operator console features a 4 line by 20 character display and 4 push button key pad.
 Striper 4 Models
T104 Controller board only
T804 5 1/4" Half Height internal packaging with front panel operator console
T1004 Table Top external packaging with power supply and front panel operator console
T2104 Single Controller Board, 1U high 19 inch rackmount with power supply and front panel operator console
T2204 Dual Controller Boards,1U high 19 inch rackmount with 2 power supplies and 2 front panel operator consoles
One Year Warranty
 Dimensions Width Depth Height 
Board 5.50" 7.80" 0.50"
5 1/4" Half Height 5.75" 9.20" 1.67"
Low Profile Table Top 9.75" 11.00" 2.50"
Rackmount 17.00" 23.31" 1.75"
Environment (Exclusive of Drives)
POWER
Input Voltage +5VDC, 10%
Supply Current 3.5 amps, max
TEMPERATURE
Operating 5 degree C to 50 degree C
Non-operating -40 degree C to 60 degree C
HUMIDITY
Operating 10% to 80% non-condensing
Non-operating 10% to 90% non-condensing
Also available as:
Library Master Specifications
RAIL Master Specifications

 LibraryMaster™ Models

TL104 Controller board only
TL804 5 1/4" Half Height internal packaging with front panel operator console
TL1004 Table Top external packaging with power supply and front panel operator console
TL2104 Single Controller Board, 1U high 19 inch rackmount with power supply and front panel operator console
TL2204 Dual Controller Boards,1U high 19 inch rackmount with 2 power supplies and 2 front panel operator consoles

 RAILMaster™ Models

TR104 Controller board only
TR804 5 1/4" Half Height internal packaging with front panel operator console
TR1004 Table Top external packaging with power supply and front panel operator console
TR2104 Single Controller Board, 1U high 19 inch rackmount with power supply and front panel operator console
TR2204 Dual Controller Boards,1U high 19 inch rackmount with 2 power supplies and 2 front panel operator consoles
Half Height
Dual Controller 1U Rackmount
5 1/4" Internal 
Half Height
Low Profile 
Table Top
Rackmount
         

Ultera Systems, Inc.
26052 Merit Circle · Laguna Hills, CA 92653
Phone: 949.367.8800 · Fax: 949.367.0758
E-mail: inform@ultera.com
Visit us at www.ultera.com

© 1994-2003. Ultera Systems, Inc. All Rights Reserved., Legal Information
| Site Map | Ultera Solutions | High Performance | Disaster Recovery | Data Archiving | Media Duplication | Video Streaming | CD-R Mastering | DVD-R Mastering | Ultera Products | Tape RAID Controller | Tape Striping | Tape Mirroring | Tape Library Striping | Tape Library Mirroring | Optical RAID Controller  | Optical Striping | Optical Mirroring | Optical Library Striping | Optical Library Mirroring  | Remote ManagementWhere to Buy  | About Ultera | FAQ | ArticlesFeedback | Press | Careers | Home |